CAT Articulated Truck 725 Specifications Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 63
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
SEBU8524 155
Maintenance Section
Torque Converter and Transmission Oil - Change
21. Check the torqu
e converter and transmission
oil level on the “FULL HOT LOW IDLE” side of
the dipstick. Refer to Operation and Maintenance
Manual, “Torq
ue Converter and Transmission Oil
Level - Check”. If necessary, add oil.
22. Shut off the e
ngine.
23. Close the hood.
Ecology Dr ain
1. Raise the hood. Refer to Operation and
Maintenance Manual, “Hood Control”.
The oil level dipstick is integral with the oil ller cap
for the torque converter and transmission oil. The
oil ller c
ap is located near the air cleaner housing.
2. Clean the area around ller cap (1) and ller tube
(2). Turn
the handle on the dipstick in order to
remove the dipstick. Remove the dipstick in order
to allow the oil to drain.
g01126900
Illustration 216
3. Clean the area around ller cap (1) and ller tube
(2). Turn the handle on the dipstick in order to
remove the dipstick. Remove the dipstick in order
to allow the oil to drain.
Note: Before you change the oil, block the front
frame of the machine.
g01127725
Illustration 217
4. Remove plate (3) in order to access the drain plug
for the torque converter and transmission oil.
Note: Plate(3)islocatedontherightsideof
transmission guard (4) in front of the front axle.
g01127726
Illustration 218
5. Clean
theareaarounddrainplug(5).
6. Remove the drain plug. Install 6B-3156 Pipe
Nipp
le in order to unseat the drain valve. Allow the
oil to drain into a suitable container.
7. Remo
ve the pipe nipple. Inspect the drain plug and
the seal for damage. If the drain plug or the seal
are damaged, replace the damaged components.
Install the drain plug and the seal.
8. Rem
ove the oil lter for the torque converter and
transmission oil. Discard the oil lter. Install a
new oil lter. Refer to Operation and Maintenance
Ma
nual, “Torque Converter and Transmission Oil
Filter - Replace”.
9. Gu
ide the dipstick down the ller tube and turn the
handle on the dipstick in order to make the seal
between the ller tube and the ller cap.
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 62 63

Comments to this Manuals

No comments