CAT Articulated Truck 725 Specifications Page 25
- Page / 63
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
126 SEBU8524
Maintenance Section
Engine Oil Level - Check
g01127512
Illustration 153
2. Loosen hose clamp (1) in order to detach the hose
from the breather. Remove breather (2).
3. Wash the breather in a clean, nonflammable
solvent. Wipe the breather with a clean, dry cloth.
Replace the breather if the breather is damaged.
4. Inspect the breather seal. If necessary, install a
new seal.
5. Ensure that the breather is dry.
6. Reposition the breather. Fasten the breather to
the top of the engine. Tighten hose clamp (1) in
order to fasten the hose to the breather.
7. Lower the hood.
i03302263
Engine Oil L evel - Ch eck
SMCS Code: 1000-535-FLV
Hot oil and hot components c an cause personal
injury. Do not allow hot oil or hot components to
contact skin.
NOT
ICE
Do not under fill or overfill engine crankcase with oil.
Either condition can cause engine damage.
The engine oil level can be checked when the oil is
cold and the engine is shut off.
Note: Perform the cold test before you start the
engine.
1. Raise the hood. Refer to Operation and
Maintenance Manual, “Hood Control”.
g01125742
Illustration 154
2. Remove oil level gauge (1). The oil level gauge
is located beneath the hood, adjacent to the
secondary fuel filter.
3. Clean the oil level gauge and reinstall the oil level
gauge.
4. Remove the oil level gauge and check the oil
level.Theoillevelshouldbebetweenthe“ADD”
and “FULL” marks on the oil level gauge.
5. If necessary, remove cap (2) and add oil through
the filler tube.
Refer to Operation and Maintenance Manual,
“Lubricant Viscosities” for the correct oil.
6. Wipe any oil from the oil level gauge. Reinstall the
oil level gauge.
7. Lower the hood.
i02210439
Engine Oil Sampl e - Obtain
SMCS Code: 1000-008; 7542-008
g01134568
Illustration 155
- MAINTENANCE INTERVALS 1
- Operation and 2
- Maintenance 2
- Maintenance Interval Schedule 3
- Autom atic Lubrication Grease 5
- Tank - Fill 5
- (If Equipped) 5
- Grease Recommendations 6
- Backup Alarm - Test 7
- Battery - Recycle 7
- Battery or Battery Cable 7
- Inspect/Replace 7
- Body Pivot Bearings 8
- Brake Pads - Check 9
- Brake System Air - Pu rge 10
- Braking System - Test 11
- Illustration 126 12
- Illustration 127 12
- Illustration 128 12
- Circuit Breakers - R eset 13
- Cooling System Coolant (ELC) 13
- Illustration 131 14
- Illustration 132 14
- Illustration 130 14
- Coo ling System Coo lant 15
- Extender (ELC) - Add 15
- - C heck 15
- Illustration 135 16
- Illustration 137 17
- Illustration 138 17
- Cranksh aft Vibration Dam per 18
- - Change 19
- Level - C h eck 20
- Illustration 146 21
- Inspect/Repl 22
- Engine Air Filter Primary 23
- Element-C 23
- Engine Air Filte r Secon dary 24
- Element - Replac e 24
- Engine Cran kcase Breather 24
- Engine Oil L evel - Ch eck 25
- Engine Oil Sampl e - Obtain 25
- Illustration 156 28
- Illustration 157 28
- Illustration 158 28
- Engine Valve L ash - Check 29
- Ether Starting Aid Cylinder 30
- (OEM Attachmen t if Equipped) 30
- Front Frame 31
- Front Suspension Frame 31
- Oscillating Hitch 31
- Rear Frame 32
- Rear Frames 32
- Dump Body 32
- Radiator Mounts 32
- Mounts for the Suspension 32
- Fuel Sy stem 33
- Fuel System Primary Filter 34
- Illustration 170 35
- Illustration 171 35
- Fuel Syst 36
- Fuel Tank Cap and Strainer 36
- Fuel Tank Water and Sediment 37
- Fuses - Re place 38
- Hoist C ylinder Bearing s 39
- Lubricate 39
- Illustration 178 40
- Illustration 179 40
- Illustration 180 40
- Hydrauli 41
- Hydraulic System Oil Level 42
- Hydrau lic System Oil Samp le 43
- Hydrau lic Tank Breat her 43
- Clean/Inspect/Replace 43
- Hydrau lic Tank Strainer 44
- Clean/Insp ec 44
- Oscillating Hi tch - Ad just 44
- Oscillating Hitch - Lubricate 45
- Radiator Core - Clea n 46
- Refrig erant Dryer - Replace 47
- Rollover Protective Structure 47
- (ROPS) - Inspect 47
- Seat Belt - Insp ect 49
- Seat Belt - Replace 49
- Secondary Steering - Test 49
- Steering Cylinder Bearings 50
- Suspension System - Check 51
- Suspension and Su spen sion 51
- Cylinder Bear 51
- Tire Inflation - Ch eck 52
- Torque Converter and 52
- Transmission O il - Change 52
- Illustration 213 53
- Illustration 214 53
- Illustration 215 53
- Ecology Dr ain 54
- Transmission 55
- Oil Filter 55
- Oil Level 56
- Torque Con 57
- Transmission O il S ample 57
- Illustration 224 58
- Illustration 225 58
- Tran sfer G ear Oil Filter 59
- Illustration 230 60
- Illustration 229 60
- Transfer Gear Oil Samp le 61
- Illustration 232 62
- Illustration 233 62
- Illustration 234 62
- Windows - Clean 63
Related products and manuals for Cars CAT Articulated Truck 725
Cars CAT 735 User Manual
(20 pages)
(20 pages)
Cars CAT Articulated Truck 730 User Manual
(28 pages)
(28 pages)
Cars CAT Articulated Truck 730 User Manual
(16 pages)
(16 pages)
Cars Cat Wheel Loader User Manual
(28 pages)
(28 pages)
Cars Cat Articulated Truck 730 User Manual
(20 pages)
(20 pages)
Cars Cat Articulated Truck 725 User Manual
(20 pages)
(20 pages)
Cars Cat Articulated Truck 740 User Manual
(20 pages)
(20 pages)
Cars Cat 735 User Manual
(20 pages)
(20 pages)
© 2020, manymanuals.com. All rights reserved. | 0.367 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals