740B EJ Articulated Truck Specications
Engine Transmission Body Plate Thickness
Engine Model Cat
®
C15 ACERT™ Forward 1 8.9 km/h 5.5 mph Front 6 mm 0.24 in
Gross Power – 365 kW 489 hp Forward 2 12.1 km/h 7.5 mph Side 6 mm 0.24 in
SAEJ1995
Forward 3 16.4 km/h 10.2 mph Base 10 mm 0.39 in
Net Power – 354 kW 474 hp
SAEJ1349
Net Power – 361 kW 484 hp
ISO14396
Bore 137 mm 5.4 in
Stroke 171.5 mm 6.75 in
Displacement 15.2 L 926 in
3
• The power ratings apply at rated speed of
1,700 rpm when tested under the conditions
for the speci ed standard.
• The net power advertised is the power
available at the ywheel when the engine
is equipped with alternator, air cleaner,
mufer and fan at minimum speed.
• Net power when the fan is at maximum
speed is 321 kW (435 hp) per the
SAEreference conditions.
• The 740B EJ meets EPA Tier 4 Interim/
EU StageIIIB emission speci cations
fortheU.S. and Europe through 2013
• No engine derating required below 2438 m
(8,000 ft).
• Peak engine torque gross (SAE J1995)
2510N-m (1,850 lb-ft)
• Peak engine torque net (SAE J1349)
2466N-m (1,819 lb-ft)
• Peak engine torque speed (1,200 rpm)
Weights
Forward 4
Forward 5
Forward 6
Forward 7
Reverse 1
Reverse 2
22 km/h
30 km/h
40 km/h
54.7 km/h
8.4 km/h
11.6 km/h
13.7 mph
18.6 mph
25.1 mph
34 mph
5.2 mph
7.2 mph
Sound Levels
Interior Cab 79 dB(A)
• The operator sound exposure Leq
(equivalent sound pressure level) measured
according to the work cycle procedures
specied in ANSI/SAE J1166 OCT 98
is79dB(A), for the cab offered by
Caterpillar,when properly installed and
maintained and tested with the doors
andwindows closed.
• Hearing protection may be needed when
operating with an open operator station
and cab (when not properly maintained or
doors/windows open) for extended periods
or in noisy environments.
Operating Weights
Front Axle – Empty 21 395 kg 47,168 lb
Center Axle – Empty 8127 kg 17,917 lb
Rear Axle – Empty 7373 kg 16,255 lb
Service Re ll Capacities
Fuel Tank 565 L 149.3 gal
Cooling System 80 L 21.1 gal
Hydraulic System 328 L 86.6 gal
Engine Crankcase 38 L 9.5 gal
Transmission 72 L 19 gal
Final Drives/ 72 L 19 gal
Differential
Output Transfer 18 L 4.8 gal
Gear Box
Ejector Cycle Times
Eject Time 14 Seconds
Retract Time 24 Seconds
Standards
Brakes ISO 3450 – 1996
Cab/FOPS ISO 3449
Level II – 2005
Cab/ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Rated Payload 38 tonnes 42 tons
Total – Empty 36 895 kg 81,340 lb
Front Axle – 1642 kg 3,620 lb
Body Capacities
RatedLoad
Center Axle – 18 179 kg 40,078 lb
Heaped SAE 2:1 23.1 m
3
30.2 yd
3
RatedLoad
Struck 17.8 m
3
23.3 yd
3
Rear Axle – 18 179 kg 40,078 lb
RatedLoad
Total – Rated Load 38 000 kg 83,776 lb
Front Axle – Loaded 23 027 kg 50,788 lb
Center Axle – 26 306 kg 57,995 lb
Loaded
Rear Axle – Loaded 25 552 kg 56,333 lb
Total – Loaded 74 895 kg 165,115 lb
15
Comments to this Manuals